How to properly care for hairdressing chairs with hydraulics?

How to properly care for hairdressing chairs with hydraulics?
This is an important part of ensuring the long-term, trouble-free operation of this critical equipment in every hairdressing and beauty salon.

We provide you with recommendations on the proper care of hairdressing chairs with hydraulics:

• Check for Hydraulic Fluid Leaks: Check the chair regularly for hydraulic fluid leaks. Leaks may prevent the chair from adjusting correctly. If you notice a leak, take immediate action to fix it.
• Cleaning the Hydraulic Pump (Hydraulics): The hydraulic pump that controls the raising and lowering of the chair should be regularly cleaned to remove hair and other debris that may accumulate around it. This will avoid possible blockages and malfunctions.
• Caring for your barber chair upholstery: Use a mild, non-abrasive cleaner to clean your barber chair upholstery to avoid damaging or scratching the material. Dry the upholstery thoroughly after cleaning to avoid damage from moisture and mold.
• Checking the stability of the barber chair: Check the stability of your barber chair regularly. Tighten all bolts and nuts to ensure they are secure. Consider replacing any worn or damaged parts.
• Professional Service: If you experience serious problems or malfunctions with your hydraulic system, it is recommended that you contact a professional or equipment repair specialist. Improper repairs can make the situation worse. We also recommend that you contact the seller of the hairdressing chair you purchased for help with repairing the hydraulics or replacing them with new hydraulics if there is a valid warranty period and more. www.salonams.eu in all cases defends the rights of its clients to the manufacturer during the warranty period for the product and provides discounts on new spare parts for hairdressing chairs (if any are needed).
  
• About the commercial warranty on hydraulic barber chairs: Please note that the commercial warranty on hydraulic barber chairs is controversial. By default, the warranty for hairdressing chairs is 1 year. But the hydraulics are only guaranteed for 6 months. According to statistics, it is extremely rare for hydraulics to deteriorate during the first year. But if this happens, it is usually a manufacturing defect, which the manufacturer corrects for free. Also pay close attention to the upholstery of the seats: mechanical damage is not covered by the warranty. Mechanical damage is: scratches, cuts, spilled paint, aggressive disinfectants. As a rule, mechanical damage can appear during:

1. unpacking of the goods (the buyer opens the box with a sharp knife or a blade, plunging the blade deep into the depths of the box. Therefore, be careful when unpacking not only hairdressing chairs, but also when unpacking any other product, since the seller will clearly recognize such a defect at first glance and guarantee this Damaged goods will be cancelled.
2. visit of a client , but whose clothes have sharp details. In this case, do not be shy and ask the client to remove any sharp parts that may come into contact with the hairdressing chair (if these parts can be removed). If these parts cannot be removed, feel free to cover the chair with a thick cape, or place the client any decorative thin pillow in the place where there is a possibility of damaging the chair (under the client’s back, under the client’s butt).
3. paint spills when a master dyes a client’s hair or performs other procedures with dye preparations. In this case, immediately wash the dye with warm soapy water, or follow the manufacturer's instructions. When performing dyeing procedures, first take care to protect the chair itself. These can be either disposable or reusable protective films for hairdressing chairs: https://www.salonams.eu/ru/katalog-tovarov/dlja-parikmaherov/parikmaherskie-kresla-2/zaschity-dlja-parikmaherskogo-kresla-ot -himicheskih-preparatov
4. disinfection: disinfectants that are too aggressive and abrasive can cause irreparable damage to the upholstery of the barber chair or the metal coverings of the barber chair. Use non-aggressive products to disinfect the barber chair and always read the descriptions of the disinfection products; the description should indicate that the product can be used to disinfect eco-leather and leather products, as well as metal coatings.
   
   Following Instructions: Always follow the instructions and recommendations provided by the barber chair manufacturer. This will help you keep your equipment operating longer. It is especially important to assemble the hairdressing chair correctly the first time. Typically, hairdressing chairs are delivered disassembled (the seat, hydraulic lift, chair base and pedal are packaged separately by the manufacturer for logistical reasons). In this way, the manufacturer reduces the cost of delivering the goods to the client, otherwise clients would pay more for delivery of a fully assembled chair.

With proper care and regular inspection, you can extend the life of your hydraulic hair salon chairs and ensure comfort and safety for both clients and employees of your salon.